Research Area :: Concrete Technology

1. Durability of concrete, 2. Sustainability of concrete structures in severe environment, 3. Mechanical performance of deteriorated concrete structures, 4. Behavior of deteriorated concrete structures under dynamic loading, 5. Modeling for deterioration rate of concrete structures, 6. CO2 credit based on the long-term durable concrete construction, 7. Recycling of demolished concrete as aggregate, 8. Repair and strengthening of concrete structures, 9. Health monitoring of concrete structures, 10. Life cycle management of concrete structures, 11. Corrosion of steel bars in concrete due to carbonation and chlorides, 12. Light-weight aggregates, 13. Brick aggregates, 14. Making smart concrete structures for long-term durability, 15. Development of sustainable road infrastructures

Leader of the Research Group: Prof. Dr. Md. Tarek Uddin, PEng.

Research Co-Lead: Tanvir Ahmed

Other Associated Faculties & Staff:



Related Publications

1. Ali, M.A., Ramim, S.S., Sultana, H., Removal of Arsenic from Groundwater Using Iron-Coated Jute-Mesh Structure, Proceedings of the “Fifth International Conference on Water, Energy & Environment (ICWEE 2017)”, American University of Sharjah, United Arab Emirates, Feb 28-March 2, 2017, pp 233-244. (ISBN978-9948-23-127-1)

2. T.U. Mohammed, H.K. Das, A.H. Mahmood,  M.N. Rahman, M.A. Awal,  Flexural performance of RC beam made with recycled brick aggregate, Construction and Building Materials 134C (2017) 67–74. doi:10.1016/ j.conbuildmat.2016.12.135.

3. Mohammed, T. U., Ahmed, T., Apurbo, S. M., Mallick, T. A., Shahriar, F., Munim, A., Awal, M. A., 2017. Influence of Chemical Admixtures on Fresh and Hardened Properties of Prolonged Mixed Concrete. Advances in Materials Science and Engineering, Vol. 2017, Article ID 9187627, 11 Pages. https://doi.org/10.1155/2017/9187627

4. Mohammed, T. U., Ahmed, T., Mallick, T. A., Shahriar, F., Munim, A., 2017. Influence of Chemical Admixtures on Fresh and Hardened Properties of Ready Mix Concrete. 1st International Conference on Engineering Research and Practice, GCSTMR, Dhaka, Bangladesh. Pages 36–41. Available in this link at ResearchGate.

5. Md. Rezaul Karim, Megumi Kuraoka, Takaya Higuchi, Masahiko Sekine and Tsuyoshi Imai (2017). Assessment of Heavy Metal Contamination from Municipal Solid Waste Open Dumping Sites in Bangladesh, International Journal of Environment and Waste Management, Inderscience Publisher (in-presss).

6. Utilization of steel slag in concrete as coarse and fine aggregate (Sponsor : Bangladesh Steel Re-Rolling Mills Limited)

7. Fresh and hardened properties of concrete made with different chemical admixtures (Sponsor: The Structural Engineers Limited)

8. Shear behavior of RC beams made with recycled brick aggregate

9. Durability of concrete made with different aggregates commonly used in Bangladesh

10. Mohammed, T. U., Das, H. K., Mahmood, A. H., Awal, M. A., and Rahman, N. (2017). “Flexural Performance of RC Beams Made with Recycled Brick Aggregate”, Construction and Building Materials, Elsevier, Volume 134, pp. 67-74, http://dx.doi.org/10.1016/j.conbuildmat.2016.12.135.

11. Mohammed, T. U., Mahmood, A. H., Kamal, M. R. I., Yashin, S. M., Zihan, Z. U. A. (2017). “Effect of Maximum Size of Brick Aggregate on Properties of Concrete”, Construction and Building Materials, Elsevier, Volume 134, pp. 713-726, DOI: 10.1016/j.conbuildmat.2016.12.164.

12. T.U. Mohammed, M.N. Rahman, Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete, Constr. Build. Mater. 125 (2016) 832–841. doi: https://doi.org/10.1016/j.conbuildmat.2016.08.102.

13. T.U. Mohammed, M.N. Rahman, A.H. Mahmood, T. Hasan, S.M. Apurbo, Utilization of Steel Slag in Concrete as Coarse Aggregate, in: 4th Int. Conf. Sustain. Constr. Mater. Technol., Las Vegas, USA, 2016: p. Paper No. – S184. doi: https://doi.org/10.13140/RG.2.1.3804.4404.

14. Ramim, S.S., Sultana, H., Ali, M.A., “Effectiveness of Iron Coated Jute-Mesh Structure to Decrease Arsenic Loading to Rice Fields”, Proceedings of the “1st Bangladesh Civil Engineering Summit, 2016”, Bangladesh University of Engineering & Technology, Dhaka, 23-27 November, 2016, pp EE3-EE10. (ISBN: 978-984-34-1512-7)

15. Mohammed, T. U., Mahmood, A. H., Chowdhury, I. M., Humayun, A. M., Ahmed, T., 2016. Sustainability of Construction Materials in Bangladesh. 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), University of Nevada, Las Vegas, USA. Paper No. S182. Available in this link at ResearchGate.

16. Mohammed, T. U., Mahmood, A. H., (2016). “Effects of Maximum Aggregate Size on UPV of Brick Aggregate Concrete”, Journal of Ultrasonics, Elsevier, Vol. 69, pp. 129-136, doi:10.1016/j.ultras.2016.04.006.

17. Mohammed, T. U., Rahman, M. N., Mahmood, A. H., Hasan, T, Apurbo S. M., (2016). Utilization of Steel Slag in Concrete as Coarse Aggregate, 4th International Conference on Sustainability of Construction Materials and Technologies (SCMT4), Paper No. S184, Las Vegas, USA, August 7 – 11, 2016.

18. Mohammed, T. U., Hamada, H., Hasnat, A., Al Mamun, M. A., (2015). “Corrosion of Steel Bars in Concrete with the Variation of Microstructure of Steel Concrete Interface”, Journal of Advanced Concrete Technology (ACT), Japan Concrete Institute (JCI), Vol. 13, pp. 230-240.

19. Mohammed, T. U., Hasnat, A., Awal, M. A., Bosunia, S. Z., (2015). “Recycling of Brick Aggregate Concrete as Coarse Aggregate”, Journal of Materials in Civil Engineering, Vol. 27, No. 7, July 2015, CID: B4014005,(doi:http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001043.

20. Mohammed, T. U., and Hassan, M., (2015). Utilization of Brick Fine Aggregate in Concrete, International Conference on Regeneration and Conservation of Concrete Structures (RCCS), June 1-3, 2015, Nagasaki, Japan, CD Proceedings, Paper No. I-21, pp. 1-11.

21. Mohammed, T. U., Khan, A. Z., and Mahmood, A. H., (2015). Recycling of Demolished Concrete as Coarse and Fine Aggregate, International Conference on Regeneration and Conservation of Concrete Structures (RCCS), June 1-3, 2015, Nagasaki, Japan, CD Proceedings, Paper No. I-22, pp. 1-12.

22. Mohammed, T. U., Ahmed, T., 2014. Influence of Some Factors on Workability and Compressive Strength of Ready Mix Concrete in Bangladesh. 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, Islamic University of Technology (IUT), Gazipur, Bangladesh. Pages 39–49. Available in this link at ResearchGate.

23. Mohammed, T. U., and Chowdhury, I. M. (2014). Sustainable Development of Concrete Construction Materials in Bangladesh, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 24-38.

24. Mohammed, T. U., and Ahmed, T., (2014). Influence of Some Factors on Workability and Compressive Strength of RMC in Bangladesh, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 39-49.

25. Mohammed, T. U., Ahmed, S. S., and Pasha, M. M. (2014). Production of Clay Burnt Coarse Aggregate for Concrete, Proceedings of the 1st IUT International Seminar on Sustainability, Recycling, and Durability of Concrete, December 8, 2014, IUT, Gazipur, Bangladesh, pp. 91-100.

26. Mohammed, T. U., and Hasnat, A. (2014). Modulus of Rupture of Concrete Made with Recycled Brick Aggregate, Proceedings of the 6th International Conference of Asian Concrete Federation (ACF), Seoul, South Korea, September 21 – 24, 2014, pp. 1118-1123.

27. Mohammed, T. U., Hasnat, A., Awal, M. A., and Shamim Z. Bosunia (2013). Recycling of Brick Aggregate Concrete: Physical and Mechanical Properties, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18 ~ 21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 202.

28. Mohammed, T. U., Hasnat, A., Awal, M. A., , and Shamim Z. Bosunia (2013). Recycling of Brick Aggregate Concrete: An Extended Study on Some Key Issues, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 203.

29. Mohammed, T. U., (2013). Sustainable Development of Concrete Construction Works in Bangladesh, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 205.

30. Mohammed, T. U., Mohammad, N. I., Sutradhar, S. K., Chowdhury, M. H. R., Hasnat, A, Khatib, J. M., (2013). Carbonation Coefficient of Concrete in Dhaka City, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), August 18~21, 2013, Kyoto, Japan, CD – Proceedings. Paper No. 208.

31. Mohammed, T. U., Hasan, P., Islam, B. K. M. A., Hasnat, A., Sharkia, S., (2012). Investigation on Different Cement Brands Commonly Used in Bangladesh, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 554-559, July 4 – 6, 2012, Thailand.

32. Hasnat, A., Mohammed, T. U., Hossain, M. N., Rahman, N., Hamada, H., (2012). Investigation on Pervious Concrete Made with Locally Available Materials, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 548-553, July 4 – 6, 2012, Thailand.

33. Sarwar, N., Mohammed, T. U., Bosunia, S. Z., Khatib, J., (2012). Development of High Strength Concrete in Bangladesh, Proceedings of the Third International Conference on Construction in Developing Countries, ICCIDC III, pp. 560-566, July 4 – 6, 2012, Thailand.

34. Mohammed, T. U., Hasnat, A., Sarwar, N., Das, H. K., Awal, M. A., (2011). Recycling of Demolished Concrete, Proceedings of the International Conference on Structural Engineering, Construction, and Management, 16-18 December, 2011, Kandy, Sri Lanka, pp. 77-85.

35. Mohammed, T. U., Recycling of Demolished Concrete (2011). Research report published in the 2nd UAP/SEL Seminar on Recycling of Demolished Concrete, IEB HQ, Dhaka, Bangladesh, December 14, 2011.

36. Mohammed, T. U., Hasnat, A., Sarwar, N., Das, H. K. D., Miah, M. J., Awal, M. A. (2011). Sustainable Development of Construction Works in Bangladesh, Proceedings of the 3rd European Asian Civil Engineering Forum International Conference, September 2011, Indonesia (printed).

37. Mohammed, T. U., Hasnat, A., Awal, M. A., (2011). Recycling of Demolished Concrete, ICCMC Meeting, 20 June 2011, Hong Kong University of Science and Technology (HKUST), http://iccmc.org/hongkong2011/Item_15_Recycling.pdf.

38. Mohammed, T. U., Kabir, M. R., Awal, M. A., Kayes, I., Miah, M. J. (2010). Poster presentation at Asian Network for Quality (ANQ) Conferences, October 2010, India.

39. Mohammed, T. U., Khan, F. A., Kabir, M. R., Awal, M. A., Mahbub, A. A, Hamada, H., and Khatib, J. M., (2010). “Recycling of Concrete Made with Brick Aggregate”, Proceedings of the 2nd International Conference on Sustainable Construction Materials and Technologies, June 28 – June 30, 2010, Universita delle Narche, Ancona, Italy, Vol. 2, pp. 949 - 960.

40. Khatib, J.M., Mohammed, T.U., J. S., Zhang, Hamada, H., (2010). “A New Generation Water Reducing Admixture for Concrete”, Proceedings of the 2nd International Conference on Sustainable Construction Materials and Technologies, June 28 – June 30, 2010, Universita delle Narche, Ancona, Italy, Vol. 2, pp. 939-948.

41. H. M. Shahin, T. Nakai, M. Kikumoto & F. Zhang (2010): Bearing capacity of different types of foundations under several loading conditions, Proc. of NFCOMGEO-V, Australia, July, pp. 111-116.

42. Khatib, J. M., Mohammed, T. U., Kayali, O., Bougara, A., (2009). “Non-Destructive Testing for Concrete with Metakaolin Cured at Low Temperature”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering, South China University of Technology. Guangzhou, China, Volume 1, Editor Li, J., Wu, B., Wu, Z., Wang, Z., and Ji, J., 2009, pp. 171-175.

43. Mohammed, T. U. and Hamada, H., (2008). “Corrosion of Steel Bars in Concrete – Facts from the Long-Term Exposure Tests”, JCI Concrete Journal, Vol. 46, No. 4, pp. 23-26.

44. Mohammed, T. U. and Hamada, H., (2008). “Healing of Voids, Cracks and Joints in Concrete Exposed under Marine Environment”, JCI Concrete Journal, Vol. 46, No. 3, pp. 25-30.

45. Mohammed, T.U., Awal, M. A., Mahbub, A. A., Mohammed, R. H., (2007). “Recycling of Demolished Concrete as Coarse Aggregate”, Proceedings of the ACBM/ACI International Conference on Advances in Cement Based Materials and Applications to Civil Infrastructure, Editors. Rizwan, S. A. and Ghaffar A., Vol. 2, A-One Publisher, Lahore, Pakistan, 2007, pp. 1077-1090.

46. Mohammed, T.U., Hamada, H., Yokota, H., Khatib, J. M., (2007). “ASR Expansion of Concrete Beams with Various Restrained Conditions – 1500 Days of Marine Exposure”, Proceedings of the ACBM/ACI International Conference on Advances in Cement Based Materials and Applications to Civil Infrastructure, Editors. Rizwan, S. A. and Ghaffar A., Vol. 1, A-One Publisher, Lahore, Pakistan, 2007, pp. 441-456.

47. Yamaji, T., Mohammed, T. U., and Hamada, H. (2007). “Study on a Simple Factor on the Deterioration of Concrete Submerged in Seawater for Long Term”, Technical Note of Port and Airport Research Institute (PARI), Yokosuka, Japan, No. 1150, pp. 1-20

48. N. Kenji, F. Zhang, T. Nakai, H. M. Shahin, and. M. Hayashi (2007): Analysis on deformation performance of cantilever retaining wall, Proc. of the 42nd Japan national conference on geotechnical engineering, Nagoya, Japan, July, pp. 1423-1424.

49. Mohammed, T.U. and Hamada, H., (2006). “Corrosion of Steel Bars in Concrete with Various Steel Surface Conditions”, ACI Materials Journal, Vol. 103, No. 4, pp. 233-242.

50. Mohammed, T.U. and Hamada, H., (2006). “Corrosion of Horizontal Bars in Concrete and the Method to Stop Earlier Corrosion”, ACI Materials Journal, Vol. 103, No. 5, pp. 303-311.

51. Hamada, H., Yamaji, T., Mohammed, T.U., Tori, K., (2006). “Unexpected Expansion of Concrete Made with Laumontite Containing Aggregates under Seawater Condition”, ACI SP 234-36, Ed. Malhotra, V.M., pp. 571-587.

52. Mohammed, T.U., Hamada, H., (2006). “Corrosion of Steel Bars in Cracked Concrete: Very Beginning to the Early Age of Exposure”, ACI SP 235-7, Ed. Malhotra,V.M., pp. 103-123.

53. Mohammed, T.U. (2007). “Bangladesh – Sustainable Development of Concrete Technology”, Proceedings of the CBM-CI – International Workshop, Editor. Ahmad, S., December 2007, Karachi, Pakistan, pp. 249-267. 29.Mohammed, T. U., and Hamada, H. (2006). “Corrosion of Steel Bars in Cracked Concrete at the Early Age of Exposure”, Proceedings of the International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka, Japan, Ed. Yokota, H., and Shimomura, T., pp. 115-126.

54. Hamada, H., Yokota, H., Yamaji, T., and Mohammed, T. U., (2006). “Long-term Exposure Test of Concrete Materials under Marine Environments carried out by PARI” , Proceedings of the International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka, Japan, pp. 31-36.

55. Akira, Y., Yamaji, T., Yokota, H., Hamada, H., Mohammed, T.U., (2006). “Influence of the Pore of the Steel-Concrete Interface on the Corrosion of Steel Bars due to Chloride Attack”, Proceedings of the International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka, Japan, pp. 145-150, 2006.

56. Mohammed, T.U., Hamada, H., (2006). “Making Sustainable Concrete for Marine Exposure”, Supplementary volume of the 7th CANMET/ACI International Conference on Durability of Concrete, Montreal, Compiled by : Gupta, P., abd Gupta, P., ACI, pp. 295-314.

57. Mohammed, T.U., Hamada, H., (2006). “Robust Performance of Slag Cement Under Marine Exposure”, Proceedings of the 7th CANMET/ACI International Conference on Durability of Concrete, Volume - Kenji Sakata Symposium on Properties of Concrete, Ed. Bremner, T.W., pp. 101-126.

58. Hamada, H., Mohammed, T.U., and Yamaji, T., (2005). “Properties of Concrete after 30 Years’ Exposure under Marine Submerged Condition”, Journal of The Society of Materials Science, Japan, Vol. 54, No. 8, August 2005, pp. 842-849.

59. Mohammed, T.U., Hamada, H., Mohammed, A.A.M., Mohammed, M.R., (2005). “ASR Induced Expansion of Concrete Beams with Various Restrained Conditions”, Proceedings of the Third Annual Paper Meet and International Conference on Civil Engineering, Editors: Safiullah, A.M.M., Ali, M.A., Ahmed, B., Noor, M.A., and Amin, A.F.M.S., IEB HQ, Ramna, Dhaka, Bangladesh, pp. 307-320, 2005.

60. Mohammed, T.U., Hamada, H., Rashid, A.A.M., Mohammed, A.A.M., (2005). “Marine Durability of Concrete Made with OPC and Slag Cement”, Proceedings of the Third Annual Paper Meet and International Conference on Civil Engineering, Editors: Safiullah, A.M.M., Ali, M.A., Ahmed, B., Noor, M.A., and Amin, A.F.M.S., IEB HQ, Ramna, Dhaka, Bangladesh, pp. 321-329, 2005.

61. M. M. Farias, T. Nakai, H. M. Shahin, D. M. Pedroso, P.G.O. Passos and M. Hinokio. (2005): Ground Densification Due to Sand Compaction Piles, Soils and Foundations, vol. 45, no. 2, pp. 167-180.

62. T. Nakai, N. Iwata, H. M. Shahin, Y. Inoue & H. Takei (2005): Influence of wall deflection process and wall deflection mode in retaining wall problems, Proc. of the 2nd China-Japan Geotechnical Symposium, China, Shanghai, pp. 641-646.

63. Mohammed, T.U., Hamada, H., and Yamaji, T., (2004). “Concrete after 30 Years Exposure - Part I: Mineralogy, Microstructures, and Interfaces”, ACI Materials Journal, Vol. 101, No. 1, January-February 2004, pp. 3-12.

64. Mohammed, T.U., Hamada, H., and Yamaji, T., (2004). “Concrete after 30 Years Exposure – Part II: Chloride Ingress and Corrosion of Steel Bars”, ACI Materials Journal, Vol. 101, No. 1, January-February 2004, pp. 13-18.

65. Mohammed, T.U., Hamada, H., and Toru Yamaji, (2004). “Performance of Seawater Mixed Concrete in the Tidal Environment”, Cement and Concrete Research Journal, Vol. 34, 2004, pp. 593-601.

66. Mohammed, T. U. and Hamada, H., (2004). “Long Term Performance of Alumina Cement Mixed with Tap water and Seawater Under Marine Environment”, ACI Materials Journal, Vol. 101, No. 3, May – June 2004, pp. 226-232.

67. Mohammed, T.U., Hamada, H., Yokota. H., (2004). “Macro-Cell and Micro-Cell Corrosion of Steel Bars in Cracked Concrete Made with Various Cements”, Eighth CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Las Vegas, USA, May 23-29, 2004, ACI SP 221-2, pp. 51-72.

68. Mohammed, T. U., Hamada, H., and Yokota, H., (2004). “Autogenous Healing, Ingress of Chloride and Sulfate Through Cracks Under Marine Environment”, 7th CANMET/ACI International Conference on Recent Advances in Concrete Technology, Las Vegas, USA, May 26-29, 2004, ACI SP 222-10, pp. 135-154.

69. Hamada, H., Mohammed, T.U., Yamaji, T., and Tori, K., (2004). “Deterioration of Concrete Made with Laumontite Containing Aggregates”, International RILEM Symposium on Advances in Concrete through Science and Engineering, 22-24 March 2004, CD ROM, Evanston, Illinois, USA.

70. Mohammed, T.U., Hamada, H., Yamaji, T., and Yokota, H., (2004). “ASR Expansion of Concrete Beams with Various Restrained Conditions – Results till 612 Days of Exposure”, Proceedings of the 12th International Conference on Alkali-Aggregate Reaction in Concrete (ICAAR), Beijing, China, October 15-19, 2004, pp. 1169-1180.

71. Yamaji, T., Mohammed, T.U., Hamada, H., and Iwanami, M., (2004). “Durability of a 30-Year Old Reinforced Concrete Wharf Under Marine Environment”, Proceedings of the Fourth International Conference on Concrete Under Severe Conditions: Environment and Loading, CONSEC’04, Seoul. Korea, Eds. B. H. Oh et al., 2004, pp. 141-148.

72. Hamada, H., Hirasaki, T., Yamaji, T., and Mohammed, T.U., (2004). “An Experimental Study on Factors Affecting Electro-Chemical Measurements of Steel Bars in Concrete”, Concrete Research and Technology, Vol. 15, No. 1, January 2004, pp. 57-68.

73. Mohammed, T.U. and Hamada, H., (2003). “Relationship Between Free Chloride and Total Chloride in Concrete”, Cement and Concrete Research Journal, Vol. 33, No. 9, 2003, pp. 1487-1490.

74. Mohammed, T.U. and Hamada, H., Yamaji, T., (2003). “Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Splash Environment”, ACI SP 217-2, 2003, pp. 17-36.

75. Mohammed, T.U., and Hidenori, H., (2003). “Relation between Strain on Surface and Strain over Embedded Steel Bars in ASR Affected Concrete Members”, Journal of Advanced Concrete Technology, Japan Concrete Institute, Vol. 1, No. 1, 2003, pp. 76-88.

76. Mohammed, T.U., Hidenori, H., and Yamaji, T., (2003). “Marine Durability of 30-Year Old Concrete Made with Different Cements”, Journal of Advanced Concrete Technology, Japan Concrete Institute, Vol. 1, No. 1, 2003, pp. 63-75.

77. Mohammed, T.U., Otsuki, N., and Hamada, H., (2003). Corrosion of Steel Bars in Cracked Concrete Under Marine Environment, ASCE Journal of Materials in Civil Engineering, Vol. 15, No. 5, October 2003, pp. 460-469.

78. Mohammed, T.U. and Hamada, H., (2003). “Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Tidal Environment”, ACI Materials Journal, Vol. 100, No. 3,May – June 2003, pp. 194-202.

79. Mohammed, T.U., Hamada, H., (2003). “Corrosion of Steel Bars in Concrete at Joints Under Tidal Environment”, ACI Materials Journal, Vol. 100, No. 4, July–August 2003, pp.265-273.

80. Mohammed, T.U., Hamada, H., and Yamaji, T., (2003). “Alkali-Silica Reaction-Induced Strains over Concrete Surface and Steel Bars in Concrete”, ACI Materials Journal, vol. 100, No. 2, March –April 2003, pp. 133-142.

81. Mohammed, T.U., Hamada, H., and Otsuki, N., (2003). “Several Factors Regarding Sustainability of Concrete Structures Under Marine Environment”, ACI SP 212-3, June 2003, pp.23-40 (presented in opening plenary session of CANMET/ACI International Conference on Durability of Concrete, Thessalonoki, Greece, 2003).

82. Mohammed, T.U., Hamada, H., (2003). “Micro-cell and Macro-cell Corrosion of Steel Bars in Concrete with Various Joints Under Atmospheric Environment”, ACI SP 212-17, June 2003, pp. 259-278.

83. Hamada, H., Yamaji, T., Mohammed, T.U., Hirasaki, T., and Komure, K., (2003). “An Experimental Investigation on Factors Affecting Corrosion of Steel Bars in Concrete”, Technical Note of the Port and Airport Research Institute, March 2003, No. 1040, Yokosuka, Japan.

84. Hamada, H., Mohammed, T.U., Yamaji. T., and Komure, K., (2003). “An Experimental Study on Application of Surface Coating to ASR-Affected Concrete”, Proceedings of the Concrete Structure Scenarios, Japan Society of Materials Science (JSMS), Vol. 3, October 2003, pp. 37-44.

85. Mohammed, T.U., and Hamada, H., (2003). “Corrosion of Horizontally Oriented Steel Bars in Concrete and the Method to Improve the Steel-Concrete Interface”, Proceedings of the Concrete Structure Scenarios, Japan Society of Materials Science (JSMS), Vol. 3, October 2003, pp. 305-312.

86. Mohammed, T.U., Hamada, H., and Yamaji, T., (2003). “Long-term Durability of Concrete Made with Slag Cements Under Marine Environment”, Report of the Port and Airport Research Institute, Yokosuka, Japan, Vol. 42, No. 2, June 2003, pp. 155-191.

87. Mohammed, T.U., Hamada, H., and Yamaji, T., (2003). “Concrete Properties and Relationship Between Surface Strain and Strain Over the Embedded Steel Bars of ASR Affected Concrete Members”, Report of the Port and Airport Research Institute, Yokosuka, Japan, Vol. 42, No. 2, June 2003, pp. 133-153.

88. Hamada, H., Mohammed, T. U., Yamaji, T., and Komure, K., (2003). “An Experimental Investigation on Application of Surface Coating to ASR-Occurred Concrete”, Technical Note of the Port and Airport Research Institute, Yokosuka, Japan, No. 1050, pp. 1-28, June 2003.

89.  Mohammed, T.U., and Hamada, H., (2003). “A Discussion of the Paper - Initiation of Chloride-Induced Reinforcement Corrosion in Concrete Structural Members – Prediction, by Chun Qing Li, ACI Structural Journal, ACI Structural Journal, Vol. 99, No.2, March-April 2002, pp. 133-141”, ACI Structural Journal, Vol. 100, No. 1, January – February 2003, pp. 126-127.

90. Mohammed, T.U., and Hamada, H., (2003). “Progress of Macro-Cell and Micro-cell Corrosion of Steel Bars in Concrete Under Marine Environment”, Proceedings of the Sixth CANMET/ACI International Conference on Recent Advances in Concrete Technology, Bucharest, Romania, 2003, pp.63-77.

91. Mohammed, T.U., and Hamada, H., (2003). “A discussion of the paper – Influence of Pre-Rusting on Steel Corrosion in Concrete by P. Novak, R. Mala, and L. Joska, Cem Concr Res 31 (2001) 589-593” Cem Concr Res, Vol. 33, 2003, pp. 1103-1105.

92. Mohammed, T.U., Yamaji, T., Aoyama, T., and Hamada, H., (2002). “Marine Durability of 15-Year Old Uncracked and Precracked Concrete Made with Different Cements”, Concrete Library International of JSCE, No. 40, December 2002, pp. 295-309. (reprinted from Journal of Materials, Concrete Structures and Pavements, JSCE, No. 697/V-54, February 2002).

93. Mohammed, T.U., Yamaji, T., and Hamada, H., (2002). “Chloride Diffusion, Microstructures and Mineralogy of Concrete after 15 Years of Exposure in the Tidal Environment”, ACI Materials Journal, Vol. 99, No. 3, May-June 2002, pp. 256 – 263.

94. Mohammed, T.U., Otsuki, N., Hamada, H., and Toru, Y., (2002). “Chloride-Induced Corrosion of Steel Bars in Concrete with the Presence of Gap at the Steel-concrete Interface”, ACI Materials Journal, Vol. 99, No. 2, March – April, 2002, pp. 149-156.

95. Hamada, H., Toru, Y., and Mohammed, T.U., and Torii, K., (2002). “Expansive Deterioration of Laumontite Contained Concrete Under Seawater Environments”, Journal of Concrete Research and Technology, JCI, Vol. 13, No. 2, May 2002, pp. 71-78.

96. Mohammed, T.U. and Hamada, H., (2002). “A Discussion of the Paper -Relationship between the Free Chloride and Total Chloride Diffusivity in Concrete by Lu, X., Li, Cuiling, and Zhang, H., Cem and Concr Res 32 (2002) 323-326”, Cem and Concr Res 33/3, March 2003, pp. 451-452.

97. Mohammed, T.U., Hamada, H., Yamaji, T., (2002). “Slag Cement – A Choice for the Long-term Durability”, Proceedings of the International Conference on Concrete in Marine Environments, Eds. Anh, N.D. and Braestrup, M.W., Hanoi-Vietnam, 6-10 October 2002, pp. 159-168.

98. Otsuki, N., Yokota, H, Hamada, H., and Mohammed, T.U., (2002). “Lifecycle Design for Durability of Offshore Concrete Structures”, Keynote Paper, Proceedings of the 1st fib Congress, Osaka, October 2002, pp. 65-84.

99. Mohammed, T.U., Fukute, T., Yamaji, T., and Hamada, H., (2002). “Long-term Durability of Concrete Made with Different Water Reducing Chemical Admixtures Under Marine Environment”, in Book “Concrete for Extreme Condition”, Eds. Dhir, K. R., McCarthy, M. J., and Newlands, M. D., Thomas Telford Publishing, UK, 2002, pp. 233-243.

100. Mohammed, T.U., (2002). “More Regional Cooperation for the Sustainable Development of Concrete Technology in the Asian Countries”, Technical Report of JCI, Special Overseas Section, Vol. 40, No. 2, February 2002, pp. 72-75